Practices to Prolong Lifespan of Buried Scraper Conveyor

Practices to Prolong Lifespan of Buried Scraper Conveyor

1. Operators should carry out no-load commissioning after having started machine. It would be better to feed materials uniformly when the device operates normally. 

2. If there is no exceptional circumstance, users cannot turn off the power source to stop machine with load. 

3. If there are several scraper conveyors to combine a production line, please start machine from the last one, and then start up them one by one. 

4. Operators should check all components regularly, in particular scraper chain and drive units. 

5. During operation, please pay attention to if there are iron pieces, large pieces and other sundries mixing into conveyors, so as not to damage equipment or cause other accidents. 

6. Keep all bearings and drive section a good lubrication, but it should be noted that scraper chain, support rails and head pulley, tail pulley and other parts must not smear grease. 

7. In general, buried scraper conveyor should be a small maintained half a year, overhauled three years. Buried scraper conveyor overhaul should dismantle all parts to be cleaned or replace worn parts. Motor and reducer should be maintained according to the technical requirements of each product.