5 Steps to Install Scraper Conveyor Better

5 Steps to Install Scraper Conveyor Better

Users must install the machine correctly after it has been manufactured, then it can be put into use. Know better how to install the scrapere conveyor is the deterministic factor that whether the machine can be operated normal. This article will introduce the method from the following steps:

1.Position Setting

At first, it’s better to make sure that where is the position of head and tail. And then users can make a position for center line of scraper conveyor.

2.Lay Out Middle Trough Body

Users can lay out middle trough body according to the machine’s center line. Also, it must make sure that laying of conveyor surface should be straight otherwise it will make the chain and trough casing worn. 

3.Install Head and Tail of Machine

It must make sure that there is some space in head and tail of machine so that uses can maintain or repair it timely. Also, center lines of chain wheel and scraper conveyor should be in a vertical status.

4.Install Scraper Chain 

Users should connect the scraper chain before making a installation. Not only should the scraper blade distribute equably in the chains, but also should the length of chain be equal. 

5.Inspection and Non-load Running

Users had better inspect the scraper conveyor totally after all the installation work is being done. Make sure that the machine has 2 hours non-load running so that users can inspect whether driven device and scraper conveyor are running normaly as well as can adjust the length of chain.

More information or any interest, please visit www.pkmachinery.com